Phone: 01795 473111 ~ Fax: 01795 439537 ~

Sectional Overhead Doors can be provided with either insulated, non-insulated or vision panels and can be operated manually or electrically.



Vision panel doors are constructed from extruded aluminium sections which can be supplied with either a mill finish, anodised or powder coated finish in a range of colours.


Sectional doors run on adjustable galvanised roller carriers bolted to each individual panel.  Helical springs are mounted on the top of the door on galvanised steel plates and bearings to provide smooth and quiet operation.

Rubber Seals are fitted all around the perimeter of the door to provide a good seal when closed to protect against the weather.


Manual Operation can be via a continous haul chain.  Smaller doors can be operated by simply pushing up and pulling down.

Electrical Operation is run on a 3 phase motor with emergency override in the event of a power failure.  All controls have open, close and emergency stop buttons as standard.

Details of special electrical automation such as remote controls and safety devices, along with integral pass doors can be provided on request.



Non insulated panels are constructed from galvanised steel sheets bonded together.             

Insulated panels consist of a high density CFC free polyurethane foam between the steel sheets with a thermal break at each joint.

The insulated doors are available in 40mm, 50mm and 80mm thick panels depending on the degree of insulation required.